Switch-plug combination K900/B/TAZ/ST3/KA3 with brake

Details

AC switch-plug combination with electronic brake for circular saws, planing machines, shredders, wood splitters.

Properties

• 3-pole switching. Suitable for mains connection without neutral conductor
• Switching capacity up to 4 kW
• Braking electronics, braking current up to 16 A adjustable
• Undervoltage release with shock protection
• Phase inverter
• Connection possibility for thermal contact
• Splash water proof cover
• usable as Alternative zu Mod.Nr. 01379000 (Güde Wippsäge) or Mod.Nr. 01480119

Suitability

The neutral conductor is not connected.

Not suitable for motors with electromechanical brake. Such motors generally have a braking disk and a braking magnet which are under the fan propeller. This can be apparent, when the saw blade is hard to move when the machine is at halt.

Installation / connection (refer to wiring diagram) / brake

The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad. by rotating the base, the cable can be routed to all 4 sides.

The blue wire is not a neutral conductor, it's the connection for the thermal contact. If the motor does not have a thermal contact, the blue wire has to be connected with the grey wire on the terminal board.

The breaking current can be adjusted with a potentiometer. On the housing base is a plug, behind which you can reach the potentiometer.

Specifications

Voltage Ue

400 V~

Current le

9,0 A

Contactor

KB-04, 400V~

Coil voltage Uc

400V~

Switching capacity

4.0 kW 400V~/AC-3

Type of actuation

Mechanically on/off

Connector

CEE 3P+N+E , 16A

Housing material

Polypropylene PP

Mounting position

Any

Protection class

IP54, splash water proof

Connection cable

1 m H07RN-F G1,5

Mounting dimensions

68 x 68 mm

Klibo-Mod.Nr.

0098.9002

Feature shock protection

The contactors are mechanically activated and keep holding with a self-holding contact

Normal contactors can be actuated by hard touch-down, so that the machine will start-up by itself. This is prevented by the integrated shock protection.

Export-Info

Customs tariff number

85362010

Origin

Deutschland

Manufacturers Info

Klinger & Born GmbH • In den Schlangenäckern 5 • 64395 Brensbach • Deutschland • www.klibo.de

Notes on delivery times¹

The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at Information on the calculation of the delivery date