Shopping cart Shopping cart is empty 0
SSK820-7A  - Switch-plug combination K900/ST3 with motor protection 7 A

Switch-plug combination K900/ST3 with motor protection 7 A

Manfacturer:
Klinger & Born
Type:
K900/ST3/KA12/M7.0/Phw/P
Product no.:
SSK820-7A
Weight:
0,80 kg
98,20 EUR * 82,52 EUR (net)
* incl. VAT
Shipping time : 1-3 days1 (ex stock}

Details

Alle variants dieses switchs: Schalter-Stecker-Kombination K900/ST3/KA12 mit Motorschutz

AC switch-plug combination for circular saws, planing machines, shredders or other machines and motors, which after power failure and power recovery are not allowed to turn back on.

Properties

  • 3-pole switching, suitable for mains connection without neutral conductor
  • Switching capacity up to 4 kW
  • Motor protection 7,0 A, Non-adjustable
  • Undervoltage release
  • Phase inverter
  • Splash water proof cover

Suitability

The neutral conductor is not connected.

Not suitable for motors in delta connection, which for example need a voltage of 230V in the terminal box for a electromechanical brake.
If needed a brake can be tapped between a phase and a star point 230V for motors in star connection.

Motor protection

The motor protection has to be selected according to the nominal current of the motor (+ ca. 10%).
A connection for a thermal contact is not provided, because the motor is better protected with the overcurrent protection.

Installation / connection (refer to wiring diagram)

The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad. by rotating the base, the cable can be routed to all 4 sides.

Specifications

Voltage Ue
400 V~
Current le
9,0 A
Contactor
KB-04, 400V~
Coil voltage Uc
400V~
Switching capacity
4.0 kW 400V~/AC-3
Motor protection
Thermal overcurrent protection, 7,0 A
Type of actuation
Mechanically on/off
Connector
CEE 3P+N+E , 16A
Housing material
Polypropylene PP
Mounting position
Any
Protection class
IP54, splash water proof
Connection cable
1 m H07RN-F G1,5
Mounting dimensions
68 x 68 mm

Export-Info

Customs tariff number
85362010
Origin
Deutschland

Manufacturers Info

Klinger & Born GmbH • In den Schlangenäckern 5 • 64395 Brensbach • Deutschland • www.klibo.de

Notes on delivery times1

The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at Information on the calculation of the delivery date

Accessories

Lids for Klinger & Born K700, K900, K3000

Lids for Klinger & Born K700, K900, K3000

Schaltterlids with Stop-Schild or emergency button for Klinger & Born K700, K900, K3000


9,40 EUR
excl. VAT

To the Product

Accessories and replacement parts

Contactor Klinger&Born KB-04/400/4S

Contactor Klinger&Born KB-04/400/4S

Replacement-contactor 400V, 4 N/O contacts for Klinger&Born switch and switch-plug combinations


25,90 EUR
excl. VAT

To the Product

Similar Products

Switch-plug combination K900/ST3 with motor protection 5 A

Switch-plug combination K900/ST3 with motor protection 5 A

Three-phase A.C. Switch-plug combination Klinger & Born K900/ST3/KA12/M5.0A, With phase inverter and motor protection for circular saws, wood splitters up to 4 kW


98,20 EUR
excl. VAT

To the Product

Switch-plug combination K900/St3 with motor protection 9 A

Switch-plug combination K900/St3 with motor protection 9 A

Three-phase A.C. Switch-plug combination Klinger & Born K900/ST3/KA12/M9.0A, With phase inverter and motor protection for circular saws, wood splitters up to 4 kW


98,20 EUR
excl. VAT

To the Product

Switch-plug combination K900/ST3/KA12

Switch-plug combination K900/ST3/KA12

Three-phase A.C. Switch-plug combination Klinger & Born K900/ST3/KA12/Phw/P, With phase inverter for circular saws, wood splitters, planning machines up to 4,0 kW


62,20 EUR
excl. VAT

To the Product

Switch-plug combination K3000/ST6/KA3 with motor protection

Switch-plug combination K3000/ST6/KA3 with motor protection

Three-phase A.C. Switch-plug combination Klinger & Born K3000/ST6/KA3/Mx, With phase inverter and motor protection for circular saws, planning machines up to 7,5 kW


120,00 EUR
excl. VAT

To the Product