Details
AC switch-plug combination for three-phase A.C. Current. For circular saws and similar stationary power tools, e.g. Elektra Beckum PK250 (note the cable length).
The undervoltage release prevents, that the machine will restart on its own after power failure.
the braking electronics brakes the saw blade so it comes to a halt in 10 seconds.
Properties
- 3-pole switching
- Switching capacity up to 4 kW
- Braking electronics, braking current up to 16 A adjustable
- Motor protection depending on the construction 5 or 7 A Non-adjustable
- Undervoltage release
- Phase inverter
- Splash water proof cover
Suitability
The neutral conductor is not connected.
Not suitable for motors in delta connection, which for example need a voltage of 230V in the terminal box for a electromechanical brake.
If needed a brake can be tapped between a phase and a star point 230V for motors in star connection.
Motor protection
The motor protection has to be selected according to the nominal current of the motor (+ ca. 10%).
A connection for a thermal contact is not provided, because the motor is better protected with the overcurrent protection.
Installation / connection (refer to wiring diagram) / brake
The switch is screwed on the housing base. Grid dimension of the screws: 68 x 68 mm.
The cable outlet is on the side of the housing base, by factory setting on the opposite side of the keypad.
by rotating the base, the cable can be routed to all 4 sides.
The brake is by factory setting set to the lowest current.
The braking current can be adjusted with a potentiometer.
Specifications
- Voltage Ue
- 400 V~
- Current le
- 9,0 A
- Contactor
- KB-04, 400V~
- Coil voltage Uc
- 400V~
- Switching capacity
- 4.0 kW 400V~/AC-3
- Braking current
- Up to 16 A adjustable
- Motor protection
- Thermal overcurrent protection
- Type of actuation
- Mechanically on/off
- Connector
- CEE 3P+N+E , 16A
- Housing material
- Polypropylene PP
- Mounting position
- Any
- Protection class
- IP54, splash water proof
- Connection cable
- 1 m H07RN-F G1,5
- Mounting dimensions
- 68 x 68 mm
Manufacturers Info
Klinger & Born GmbH • In den Schlangenäckern 5 • 64395 Brensbach • Deutschland • www.klibo.de
Notes on delivery times1
The delivery time applies to deliveries to Germany.
Delivery times for other countries can be found at